Businesses inside their private network use the IP address 10.0.0.2. Routers used by businesses keep the main IP, such as 10.0.0.1 as the primary gateway. They assign 10.0.0.2 as the subnet for clients. Some brands like Siemens, Edimax, and Micronet use 10.0.0.2 as the default gateway for login.
The subdivision of an IP network is known as a subnet. Creating a subnet in a private network starting from 10.0.0.2 serves the purpose of avoiding any network conflict. It also assists in easy communication inside a network.
In the case of a large network, such as a business, the routers have 10.0.0.1 as their default gateway login. Their configuration is such that a subnet in them can support a client IP address that begins with 10.0.0.2.
What is 10.0.0.2 Router Login Used For?
IP QoS: Permits the setting of bandwidth so that computers may avoid heavy load.
DNS and Proxy Settings: DNS is the system that transforms a domain name in the machine-readable address, whereas proxy refers to the medium that connects two endpoint devices.
WPS: WIFI Protection System helps make wireless communication quicker, safer, and more efficient.
MAC Address: Gives unique addresses among the hardware devices connected in a network.
LAN, WAN, and WLAN Settings: Permits the configuration of different types of area-based networks. DNS 10.0.0.2 may be used for setting the security settings.
DHCP: Dynamic host configuration protocol permits the server to automatically assign a different address in a sequential manner.
PPPoE: Point-to-Point over Ethernet is a protocol used to create a DSL connection to the internet.
How to Access the 10.0.0.2 Admin Login Page?
For accessing the network settings:
Step 1 – Open the browser on your system and go to the address 10.0.0.2.
Step 2 – The https://10.0.0.2 login page will open.
Step 3 – Enter login credentials.
Step 4 – After successfully logging in, the router network settings will appear on the screen.
It is also possible that you may not be asked to enter any details, which is the case with some brands. In such a case, you would be redirected directly to the configuration settings page.
Other Login Guides:
- 192.168.o.1.1 IP Admin Login, Username & Password
- 10.0.0.138 IP Admin Login, Username & Password
- 192.168.10.1 IP Admin Login, Username & Password
- 192.168.0.254 IP Admin Login, Username & Password
What to Do When You Don’t Remember Your Password?
Your best chance would be to search if you’ve written it somewhere. If you still fail to find it, you’ll have to force restart your router, which will configure it to factory settings.
How to Reset the Wireless Router Password?
Find the reset button on your modem and press and hold it for 20-30 seconds with a sharp-pointed object. This will reset the router so that the router can now be logged into using the default login details.
10.0.0.2 – Telkom Router Login
Follow these steps:
Step 1 – Enter http://10.0.0.2 in your browser’s address bar.
Step 2 – Enter the username and password of your router.
Step 3 – Click on Log In.
Step 4 – Now, you will be successfully logged into your router settings.
Telkom Router Password Reset
Telkom routers are sturdy and long-lasting, and so are the best options for homes and small office spaces. Because routers have default gateway IP address to log in and access their settings, you need to gain access in Telkom routers using the 10.0.0.2 IP address.
“Telkom Wifi Password forgot” is a prevalent issue as the users don’t store the credentials safely. Carry out the following steps, and you will be fine.
In case you’ve forgotten your password, you can either
1. Change the default login credentials.
2. Reset the whole system by pressing and holding the reset button for 30 seconds.
To Change the Default Login and Password
Step 1: Open the browser and enter the address https://10.0.0.2/ in the address bar.
Step 2: On the following login page, enter the default username and password. For Telkom, the default login credentials are:
- Username: blank (nothing)
- Password: admin
Step 3: Because the default login is easy to obtain, it can be susceptible to hacking. So, first and foremost, you need to set a unique username and strong alphanumeric password.
Example: qwerty2[email protected]#, ebany1789&@
How to Set A Unique SSID
SSID refers to Service Set Identifier. In case it is left unchanged, anyone can make a guess and enter your router settings. For securing your router, you need to change the SSID to something unique like Mr&MrsKashyap or A&PRouter.
How to Update Security Settings
You will find a security tab in the router’s admin tool. On it, enable WPA2-PSK encryption because it is the current industry standard for encrypting networks.
Reset Telkom Router Password
In order to reset your router:
Step 1: Press and hold the reset button of your router for 15-30 seconds. This can be done with a pointed object.
Step 2: After doing so, release the clip, and your router will be configured to its default settings.
- 192.168.254.254 IP Admin Login, Username & Password
- 192.168.0.101 IP Admin Login, Username & Password
- 192.168.0.3 IP Admin Login, Username & Password
- 192.168.100.1 IP Admin Login, Username & Password
Q 1. Cannot access 10.0.0.2 from the ADSL router?
Firstly, verify if you’re using the correct address.
Q 2. 10.0.0.2 is not Loading/Working?
If you’re using the correct address, then there is also a possibility that:
- There’s an issue with the connection of your router and PC. Resolve this issue.
- You may resolve to reset the router and restarting the process if nothing works.
Q 3. How to Change the DLink Router Password?
Follow these steps:
Step 1: Connect to the network. Open the browser and enter http://192.168.0.1 in the address bar. If this doesn’t work, you may go to http://dlinkrouter or http://dlinkrouter.local.
- Username: admin
- Password: blank (nothing)
Step 2: On the settings page, click on the Setup tab and then go to wireless settings.
Step 3: Find a manual wireless network setup and click on it.
Step 4: A new screen will appear. On it, find “wireless security mode.” A section called Pre-shared key will be there.
Step 5: Enable WPA2 security and create your required password.
Step 6: Save these settings.
Q 4. Unable to log in to Admin Settings ( 10.0.0.2 not responding)
When the wrong IP address is entered, an error comes up saying “Web page not responding). Check if you’re using the correct IP address.