Belkin Router Login, Username, Password and IP: Nowadays, everyone is in the need of internet connection. Without the internet, one can’t imagine their life. In the era of browsing, gaming, streaming and more, the WiFi router is the single most important piece of technology in our home. Switch communicates a WiFi signal, permitting your gadgets to interface with one another and the web. Various switches are accessible from a wide range of produces. Setting up the Belkin router involves long-range and high connectivity with security.
Turn on the Belkin Modem/Router
Step 1 – The first step is to power up the Belkin modem. After that wait for all the lights to initialize which means that the modem is successfully connected to the ISP. Hence, the connection is established.
Step 2 – When all the connections are online, we have to connect the Ethernet of our wired internet, which will connect to our modem and router.
Step 3 – Now check whether both Belkin modem and Belkin router are able to connect to the internet by searching anything on them.
Step 4 – Connect the wireless devices to the Belkin modem or Belkin router. Wait for the connection.
Belkin Router Login and Manual Set Up
Here, we have mentioned some steps which help to manually set up the Belkin router.
Step 1 – First, we have to connect our device whether PC or laptop to any one of the Ethernet port of the Belkin router.
Step 2 – Further, searches any web page and enters the router default IP address in the given top bar and then press Enter. Belkin’s router default IP address will appear on your screen.
Step 3 – After that click on the login button to login to Belkin Router.
Step 4 – Just don’t add the password, otherwise, your connection will not step up properly.
Step 5 – Click submit.
Step 6 – To select the connection type, click the connection type under WAN.
Step 7 – Selects any connection type, whichever you want. After that, click next.
Step 8 – Enter your ISP details for further process and then click apply changes button.
- Xfinity/Comcast® Router Login, Username, Password and IP
- Spectrum Router Login, Username, Password and IP
- 10.0.0.2 IP Address to Login into Telkom, D-Link Router
Setup Wireless Feature on Belkin Router
Step 1 – Open a web browser, search for Belkin’s router default IP to access the router.
Step 2 – Under the web page, go to Wireless ⇒ channel and SSID and configure the network name
Step 3 – When wireless settings have been configured, go to the wireless section, and then click Use as Access Point.
Step 4 – After that, select enable.
Step 5 – Enter a unique IP address.
Step 6 – Then, click on apply changes.
Step 7 – Connect your wireless device to your wireless connection.
- 192.168.0.10 IP Admin Login, Username & Password Guide
- 10.0.0.138 IP Admin Login, Username & Password Guide
- 192.168.o.1.1 IP Admin Login, Username & Password Guide
- 192.168.100.1 IP Admin Login, Username & Password Guide
Enable Wireless Security:
Step 1 – The foremost step is to open your internet browser.
Step 2 – Then you have to enter the Belkin’s router IP address.
Step 3 – Press enter on your keyboard.
Step 4 – After that, you have to click on the security under wireless which displays on your screen. From the dropbox select WPA/WPA2- Personal. Click on apply changes appearing there
Step 5 – Click submit.
Step 6 – A box will appear on your screen, enter your password and then click on apply changes at the bottom.
Step 7 – After all these above-mentioned steps, you have saved your settings and the router will broadcast a secure wireless broadcast.