Looking out for a way to gain access to the Linksys Router setup page? Then you are in the right place. Here, we will guide you to get access to your Linksys router setup page. Before starting from today’s topics; if you are Linksys router you should be knowing about the model you have; If you don’t know, do check out the model you have first!
Linksys Router Login
Before starting from today’s topics just take a lot at the requirements you need to take care of for attaining access into the setup page.
First and foremost you need:
- Linksys router,
- Access to the internet via Ethernet or maybe WiFi also,
- A web browser for getting access to the setup page.
If you are ready with the above-mentioned particulars then you are all set to start! So, let’s not wait and start with today’s steps by step tutorial on How to Login to a Linksys Router and Access the Setup Page.
1. Make Sure You Are Connected to Your Linksys Router
As mentioned above, you need to take a look at the requirement before you start. Skip this step if you are done with the requirement section. If not, then make sure first that you are connected with the internet either by Wi-Fi or by Ethernet port. Getting connected to the internet is the most basis first and foremost thing to do without the internet you can’t do any of the future steps!
2. Open Your Web Browser and Go to 192.168.1.1
After completing the first step; Now, let’s jump to the second step you need to do. As mentioned in the requirement section you need a fully working web browser for getting access.
Step 1: Get your web browser just go to the search bar and type this IP address 192.168.1.1.
Step 2: Just copy it from here and make sure that this number doesn’t change as this is an official IP address used to get to access into Linksys router site.
Step 3: If you are not getting your IP address then you can take a look at the IP address for your model as Linksys does have some of the models with different IP addresses.
Step 4: If you aren’t getting the IP address for your router then you use this for knowing the assigned IP address for the router model you are using. Or else you can also take a look at the manuals provided with the router for specific information about the router you are using.
If you are using the manual don’t keep the manual back as you will require to take a look at the manual again.
3. Enter the Username and Password for Your Linksys Router
Step 1: After getting connected with the internet and typing the particular IP address for the Linksys router. Then, you will be directed to a login page for the Linksys router you are using.
Note: Keep this in mind that the interface of the login page will depend on the model and version of the router.
Step 2: In the login section, you have to type the username and password for getting access.
Step 3: Don’t remember your username and password? Don’t worry, the Company itself set the usernames and password.
Step 4: If you don’t remember anything then you can get to know your official username and password from here. Or else, if you haven’t kept the manual back then you can check in manual for username and password.
- Belkin Router Login, Username, Password and IP
- Xfinity/Comcast® Router Login, Username, Password and IP
- Spectrum Router Login, Username, Password and IP
How to Configure your Linksys Router
And now, you will be on the official configuration page. So now, you have access to bring any changes you need. If you aren’t aware of settings for that the better way is that you can write down the current setting or take a picture of your screen showing the current settings. This will be useful for you if you mess up somewhere in settings.
What If My Linksys Router or Network Stops Working After A Configuration Change
If by mistake the changes done by you tend to break the internet connection then you can follow a 30 30 30 reset trick for getting things ready to go! Or the easiest way, you can take a look at the default setting you have written and change. Also, you can take a look at the picture you have taken for reverting it.