192.168.0.1 IP Admin Login

  • Home
  • IP Login Guides
    • 192.168.o.1.1
    • 192.168.1.1
    • 192.168.1.254
    • 10.0.0.1
    • 10.0.0.138
    • 192.168.2.1
    • 192.168.100.1
    • 192.168.254.254
    • 192.168.10.1
  • Contact Us
  • Disclaimer
  • Privacy Policy
  • Terms of Service

AT&T Router Login – Find Username, Password and IP

May 14, 2022 By Admin

Telecommunications and Media have emerged as one of the most primary needs in the 21st Century. With the advancement in the sectors of technology, AT&T is a holding company that provides worldwide services of media and telecommunications. Referring to the current pandemic situation, with online classes and business work taking place virtually the need for a high-speed Internet is a compulsion. The company has extended its operations of providing wireless and wireline electronic communications, video, and Internet services worldwide.

However, AT&T services make it easier for its customers to avail of their services online without commuting. By simply signing to the AT&T services they provide the best router according to the services. The company also provides an additional service of self-installation of the router and getting connected to the Internet in less than an hour. The following article guides you on how to login to your specific router and changing of settings accordingly.

HOW TO LOG IN TO AN AT&T ROUTER

AT&T provides an option of self-installation which makes it easy for the customer to log in to the router without any help from a technician. The process is effortless and can be done quickly and does not require any specific technical knowledge. The self-installation facility saves transportation cost and the router is also available at the doorstep of the customer. The router can also be collected from an AT&T location.

LOGGING INTO THE ROUTER

To log in to the router one must take note of the following steps:

Step 1: Unboxing and setting up the hardware

The router arrives with a packed box containing all the essentials for setting up the device. The device comes with a manual providing all the instructions for setting the device. The gateway device consists of colored ports that match the cords on the device thereby makes it easier for the cables to connect. Carefully connect the wires to the right colored ports and immediately plug the router to a wall socket.

Step 2: Switch on the router

It takes a maximum of 10 minutes for the router to power up completely. The solid green light that turns on gives the signal that one can continue with the login process.

Step 3: Connecting the Router to a mobile phone or your PC

To connect the mobile phone to the Internet facility one must use the default Wireless Network Name and Wireless Password which will be written on a black sticker on the side of the provided router. The next step is to go to the settings option and click on the Wi-Fi settings menu. A list of available networks will be displayed you must find the connection that matches the default Wireless Network Name listed on the provided router. Select on the required connection and enter the default Wireless password displayed on the device. Now, open an internet browser to check the availability of an internet connection

Subsequently, plug an Ethernet cable into an Ethernet port that is on the back of the item. The other end must be connected to the Ethernet port of your PC. One does not require a password to connect to the Internet since it is a hardwired connection.

Step 4: Next open an Internet browser on your mobile phone or PC.

Step 5: Subsequently enter the router’s default IP address in the address bar and press enter. The router’s default IP address is always listed on the side of the device. In the case of the AT&T router, the default IP address is either 192.168.1.254 or 192.168.1.1

Step 6: Finally the router’s main menu will be visible. Generally, AT&T router does not require a default username or password to log into the device. But if the item has a default username or password on the side of the product you will be asked to enter the details while logging.

In case you are asked to enter the username or password but no information is provided on the side of the device one must try the following combinations:

  • Router username: admin or leave blank
  • Router password: attadmin or leave blank

USING THE SMART HOME MANAGER

After you have logged into the device with the availability of internet access you can check the AT&T web and mobile app, Smart Home Manager. Smart Home Manager can be accessed via a web browser on your PC and also by downloading it from Apple App Store or Google store. The app helps the user to keep a routine check on its account, pay bills, and can also change settings when needed.

To log in Smart Home Manager on your PC:

Step 1: Switch to an Internet browser

Step 2:  Visit the website https://myhomenetwork.att.com/#/login.

Step 3: Finally sign in with your required AT&T username and password

To log in Smart Home Manager on your Mobile Phone:

Step 1: First, download the smart home manager app from Google play store or Apple store

Step 2: Second, open the app as soon as it completes downloading

Step 3: Lastly, sign in with your required username and password

How To Reset AT&T Router

Rebooting is the primary option in case of any glitches, however, if the issue does not persist one can also try by resetting it. If the router is not functioning properly even after rebooting one can try by resetting it as well. Resetting will delete all the information and return the router to its default settings. It is advisable to remember all the details such as device access code, Wi-Fi username, and password before resetting in case you have changed it from its default settings.

One must follow the below-mentioned steps to reset your router:

Step 1: First, turn off all the devices connected to the router

Step 2: Second, try to locate the reset button on the AT&T router. It is mostly located on the back of the router.

Step 3: Following the previous step reset the button using a ballpoint pen or the end of a paperclip.

Step 4: Keep pressing the reset button until the lights appearing on the router will turn off.

Step 5: You must keep pressing the reset button for a minimum of 15 seconds and can release it after that. Releasing the button beforehand might not complete the process.

Step 6: Now the router is in its reset mode. The lights turning solid green again is an indication that the reset process is completed.

Step 7: Finally you can set your router back to the previous settings which were before the reset.

The 30/30/30 Reset Method:

One can also try the 30/30/30 method to reset your router. To implement this method follow the given steps:

Step 1: The first step is to turn off all the wireless devices linked to the router

Step 2: In the second step press the reset button for at least 30 seconds using a pen or a paperclip.

Step 3: Even after 30 seconds continue pressing the reset button and unplug the router from the wall socket.

Step 4: Subsequently, leave the router unplugged for 30 as simultaneously you are holding the reset button

Step 5: After completing the above steps, plug the router back into the socket and hold it for another 30 seconds.

Step 6: The router will be completely reset after releasing the reset button.

Step 7: The green solid lights appearing on the router is the indication of the completion of the reset process.

Step 8: Finally you can customize your settings by logging back into the router.

HOW TO CONFIGURE AT&T ROUTER

It is advisable to change the settings of your router to protect it from unknown sources after getting logged in. It is possible for any unknown source to login to your device without your prior permission. Therefore it is always preferable to change the Wi-Fi network name, password, and access code before you get connected to the Internet with any other wireless device.

On can use either a Smart Home Manager or the router’s main menu on an internet browser to change the settings. Helpful tools are also available to test the efficiency and speed of the device plus can also keep a check on the services.

CONFIGURING UNDER ROUTER’S MAIN MENU

The router’s main menu is also an option to have access to the Wifi network name, access code, and password. One can also run a speed test to check it. Follow the below-mentioned instructions to configure AT&T router with router main menu:

Changing the Device Access Code

An access code is available on the side of the product available to you. It is important to change such codes it possible. While locating for router’s settings a menu might appear on the screen to enter the device access code.

For changing the Device Access Code:

Step 1: First log in to your router

Step 2: In the second step, the browser directs to the “Device” menu. Click on the Device tab appearing on the top left-hand corner if not highlighted

Step 3: Click on the Access code appearing under the Device submenu

Step 4: Next, if the user has not entered the router’s default access code previously, the user will be asked to enter now for access to the next page. The default access code needs to be entered in the text box. Click “Continue” to proceed.

Step 5: Following the previous step enter the current access code on the option displaying “Enter the Old Access Code”. In case one has not changed its access code, the access code will be the one listed on the side of your device. Enter the access code into the text box

Step 6: Then, enter the preferred access code in the “Enter New Access Code “ field.

Step 7: Continuing the previous step to save your settings click on “Use New Access Code”.

Step 8: Subsequently the next page will assist the user to set up a hint to the access code if the user tends to forget it.

Step 9: Click on “Save” and save the changes

Step 10: Finally a confirmation message is displayed at the top of the screen confirming that the device access code has been changed successfully.

CHANGING THE WIFI NETWORK NAME AND PASSWORD

It is always preferable to change your Wifi network name and password and update your settings. It is for the security of the internet connection. Changing the wifi network name and password will keep its details confidential. For changing AT&T network name and password follow the below-given steps:

Step 1: First click on the “Home Network” tab on the router’s main menu.

Step 2: Second, click on the “WiFi” submenu under the Home network tab. Enter the access code if so asked and click on “Continue” to proceed.

Step 3: Scroll down to the “Home SSID” section on the WiFi page.

Step 4: Next, switch on the “Home SSID enable”

Step 5: Thereafter change the default WiFi network name from the text box appearing next to “Network Name (SSID)”

Step 6: By using the dropdown menu highlight “Custom password” in the “Security” field.

Step 7: Therefore the default password can be changed in the text box of the “Password” field.

Step 8: Continue to retype your new password to confirm it.

Step 9: Move to the “Guest SSID” section by scrolling down the page.

Step 10: Switch on the “Guest SSID” signal in the dropdown menu next to “Guest SSID Enable”.

Step 11: Thereafter change the Guest Network Name.

Step 12: For changing the password you can do so in the “Password” text field.

Step 13: Finally click on save to confirm and apply all your changes.

RUNNING A SPEED TEST

Follow the given instructions to run a speed test:

Step 1: First, log in to your router

Step 2: Second, select on the “Diagnostics” menu

Step 3: Click on the “Speed Test” menu under the “Diagnostics” menu

Step 4: Click on the “ Run Speed Test” to start a speed test

Step 5: The final step is to wait until the speed test gets completed. The “Test History” section will display the result. Upstream and Downstream speed will be the two options displayed.

CONFIGURING UNDER SMART HOME MANAGER

For configuring Router using Smart Home Manager one must take note of the following steps:

CHANGING WIFI NETWORK NAME AND PASSWORD

The Smart Home Manager is an easy option to change the WiFi credentials ensuring its security. Take note of the following steps to update the WiFi network and Guest network according to your required choice:

Step 1: First log in to the smart home manager either on your Pc or mobile phone.

Step 2: Click on the “more” tab option available on the top of the screen

Step 3: By moving the arrow to the right click on the “Network” option to reach the “Network” page.

Step 4: Next, “Main WiFi “ and “Guest WiFi” are the two options available. Click on each of the fields to change the network names and passwords.

Step 5: Select the “WiFi Network Name(SSID)’’ under the main WiFi Network

Step 6: Then, to clear the textbox click on the “x” to the right. Save the settings after entering your new network name.

Step 7: For returning to the previous page click on the back arrow naming “Change WiFi Network Name” at the top left of the screen

Step 8: Now, click on the “Wifi network password” field under the main WiFi network.

Step 9: Therefore, to clear your old and save the new password click on the “x” on the next screen

Step 10: To return to the previous screen click on the back arrow labeled “Change WiFi Password”

Step 11: Incase for Guest WiFi network repeat steps 5-10 for the change in wifi network name and password.

Please note that the Guest Network Name should be similar to the Home SSID to show that the connections belong to the concerned user. Click on the toggle switch to enable the guest network after you have changed your name and password.

INVITING USERS TO THE GUEST NETWORK

One can use the Smart Home Manager to send invites to people in case one wants to share their internet facility after you have enabled your guest network. Follow these steps to do so:

Step 1: First select on the “Tools” tab appearing on the top menu of the user’s screen.

Step 2: Select the option “ Invite Guest” under “Tools” to send an invitation.

Step 3: Next to the Guest network, select on the “Email” button.

Step 4: Finally fill all the necessary information to send an invitation. The Smart Home Manager send all the instructions to another party on how to use the guest internet facility.

RUN A SPEED TEST

A speed test can be done to check the speed of the internet connection according to the facility provided. Follow the below-given steps to run a speed test:

Step 1: First select on the “Tools” tab appearing on the screen.

Step 2: Second, click on the “Speed test” option

Step 3: The next page will appear on your screen. Click on the “Run Speed Test “ option.

Step 4: It may require a few minutes for the process to complete.

Step 5: Lastly, the “Speed Test History” section displays the result of the test.

FAQ

This section answers some of the general queries that the users might have despite all the detailed information given. The section gives a summary of the issues or glitches that we have discussed in the guide.

How do I access my AT&T Router Admin?

Logging into the device for reaching the configuration menu is the same as accessing the AT&T router administration page. Follow the given steps to access AT&T router admin:

Step 1: First, open an internet browser on your Pc or mobile phone

Step 2: The user needs to enter the router’s default IP address in the address bar

Step 3: Finally, the user needs to enter the admin username and password into the fields when asked to do so. For more details kindly have a look at the section “ Logging into an AT&T Router”

What is the default password for AT&T Router?

Most of the AT&T router does not come with login details. In case they are provided with them they would be available on the side of the router. The manual attached also sometimes contains the default username and password for the router. The SSID name and password are different from the admin username and password combination.

What is AT&T router IP?

192.168.1.254 or 192.168.1.1 are the most common IP address of AT&T routers. The IP address is generally required for the configuration of the AT&T web interface. The IP address is available on the side of the product.

Is an AT&T Router any good?

AT&T Router is famous for providing high-quality internet facilities. It produces routers manufactured from renowned brands such as Motorola and Netgear. These manufacturing brands are known for their quality product. They guarantee the durability of AT&T routers.

How fast is an AT&T Routers?

AT&T Routers are known for its high quality and speedy Internet facilities. One can also check the speed of their Internet by simply running a speed test from the device main menu or Smart Home Manager. You can also check the section “How to configure AT&T Router” to find out how to run a speed test.

CONCLUSION

I hope we can help you if you are seeking for a guide on how to completely reset AT&T Router and then configure again. The guide is written in very simple language and can be easily understood. AT&T router can be easily reset by following few simple steps. All the related issues and problems are also being discussed in the guide. For a high-quality Internet connection, AT&T provides the best routers. An additional self-installation facility is a plus point that adds to its Unique selling Point(USP). Additional methods are also discussed in the guide briefly for any troubleshooting that might occur. Thank You! for your patience and time.

Filed Under: Router Login

Cisco Router Login – Find Username, Password and IP

May 14, 2022 By Admin

Facing problems in your router? This will only happen if some of the settings go wrong. To fix the issue you must log in to your account and solve the issue. You can disable the settings which are causing the problem. Change the username and password for better security. Make sure you connected to your router network through Wi-Fi or Ethernet. Once you login enters in your admin interface and do the changes. Reset your account for better performance.

Default IP Address For Cisco Router

All the routers are associated with an IP address so that information can be passed to a specific destination. The common IP address of most of the Cisco routers is 192.168.15.1.

If you want to change your IP address then it is possible. Follow the steps to change the IP address.

Step 1 – You must have a CD which was given to you while your wireless router’s setup.

Step 2 – The web-based login panel of your router can also be used.

Steps for IP Address Recovery

When you change your IP address and forgot to note it down then that occurs a problem for you. To reset or know you changed IP addresses then do the following steps.

Resetting your device to default will help you out here. All you need to do is just press and hold the RESET button on the backside of the router for about 15 seconds. This action will set all your changed settings to default. The default IP address is 192.168.15.1.

From the Disk provided you can check your router’s IP address. Or feel free to contact your service provider to know your IP address.

How to Login to Cisco Router: Setup Procedure

Step 1 – Open your web browser.

Step 2 – In the search box of the web page type the following IP address 192.168.15.1. Remember this is the default IP address of the Cisco router.

Step 3 – The main page of the Cisco will open up. Now, enter your login credentials username and password. If you made default settings then enter the default settings for your router. Enter “admin” as your router’s Username as well as for your Password. That is Username: admin and Password: admin.

Step 4 – Then, hit enter.

Now, you can access your account and can make any following settings according to your wish. Set up your router as you wish. The username and password of your router can also be changed.

Conclusion

Sometimes the network connection weak and it is common. All you need to get back with good network speed is change router settings. For that, you need a username and password access. Once you have those credentials then you can easily log in to your account and do the following settings. You can even try the reset button present on the backside of the router to set the settings to default. The reset will help without much strain. Do the login and IP address recovery very carefully without any mistakes.

Filed Under: Router Login

Arris Router Login – Find Username, Password and IP

May 13, 2022 By Admin

In this current pandemic situation most of the things have been transformed into digital mode and an internet connection is the base of this digital world . Router is such a device which helps in bridging or setting communication between the internet connection and the devices which could be mobile as well.

Well you can think about modem here but they are different from each other . Modem can be connected to only one device at a time but with the help of a router you can access the internet from multiple devices at the same time.

Arris is a telecommunications equipment Manufacturing company and they manufacture modem , routers, gateway devices and many more. Well, while installing a router one of the most important portions is to log in to it properly and to update the security settings from the main menu of the router to experience a secure and hassle free internet connectivity.

Arris Router comes in several different models but they all obey the same basic instructions to log in for the first time. Many users have been reported that, while installing the new Arris Router for the first time they have faced difficulties but now you have nothing to worry about.

In this article you will get all detailed briefing regarding it’s log in, methods of changing username and password, if any issues arise how to reset or reboot to get the solution. So scroll down to reach them.

How to Set Up an Arris Router

After receiving the box of the router you will proceed for it’s set up. To set up your router, the very first thing you need to do is to log in to the main menu of the router to get connected to your internet and then you can go for further steps. After that to get a safer internet connection you can reconstruct the settings including , changing the name and password of wireless SSID network, password of router, but above all you need to set up the Hardware of the router.

For this, you will need the router cable, two ethernet cords and A/C power cable. Well, in the box you can get only one ethernet cord, so in that case you need to either purchase or borrow to complete it’s setup. For instance, an Arris cable router needs coaxial cable included in the package. Here’s the steps to set up:

  1. Set up the connection between the router and the modem –

Firstly, in this step you will need an ethernet cord or coaxial cable modem and router.

The Ethernet cord is used to make the bridge between modem and router.So initially, connect your Arris cable router to the cable line with the coaxial cable from the box. Now, screw one end of the cable to the coaxial outlet in your home and connect it’s other end to the router.

  1. With other Ethernet cable connect the computer and router –

For this step you will need another ethernet cord.

Now take another ethernet cable and attach it to the ethernet port on the router’s back. On the other hand, attach the other end of the ethernet port to the computer but for wireless cases users can skip this step.

  1. Connect your router into an outlet with the A/C power cable –

For this method you will need a power cable.

Plug one end of the power cable into the outlet and another end to the router and wait for two to five minutes for its power on.

How to Log in to an Arris Router

Once the hardware setup is done on the Arris router, now you can go for the process of logging in. For this there are three ways to log in to Arris Router and they are : by using a web  browser, by using the network name and password of SSID and lastly by using the mobile application. In this article you will get to know how to apply those steps to log in. They are as follows :

How to Login to an Arris Router with a Web Browser

You can log in to your Arris Router with the help of web browser and for this follow the steps :

  1. Firstly, locate the your device’s username and password which is on the back of it’s – You can find the default login credentials on the sticker which is sticking or it could be printed on the backside of the router and from there you need to find the password and username and also the username and password of SSID. Basically for the first step you will require the router’s username and password but not require to use SSID username and password till letter.
  2. Secondly, via your smartphone or computer open an internet browser – After finding the usernames and passwords from the router’s back, you need to enter your Arris router’s IP address and after that hit the enter button . Well, if you are unable to find it you can try one from these IP addresses :
  • http://192.168.100.1
  • http://192.168.1.1
  • http://192.168.254.254
  • 168.1.254
  • 168.7.254
  • 0.0.1
  1. Thirdly, you can find the router’s login page is appearing on the browsers page–

Here, in the corresponding text boxes you need to type your Arris router’s default username and password. For most of the Arris Router the username and password are “admin” and “password” respectively. Well, you can bypass the password if you hardwired it to the computer.

  1. Finally, after giving credentials press enter key-

Press the enter key after giving all required information regarding the router and in the web browser, the router’s main menu will appear.

How to Log in to an Arris Router Using the SSID Network Name and Password

You need to find the default SSID network name and password before logging in to your router on a mobile device. You can track the default credentials printed or sticked on the back of your router. After getting login credentials go through those points :

  1. In your general settings there will be a submenu or wireless internet icon and this will be depending on your device. Firstly, you need to go to that icon.
  2. Then you will get a list of available connections there and from them opt for that network which is the same as with the SSID name which is listed or printed on the back of your Arris Router. After finding them, hit a click on it.
  3. Now, click on the connection and then you need to enter the default password which is available on the back of the router, when it is required. Now your device is connected to the internet.
  4. Now navigate to any internet browser on your device and go to the address bar. There you need to enter the router’s IP address and hit the enter button from your keyboard.
  5. After this you will reach the login page and there you need to type in the router’s default username and password combination. Hit the enter button from your keyboard to reach the main menu.

How to Log in to an Arris Router Using the Mobile App

You can easily log in if you have an Arris SURFboard with the help of the SURFboard application which is easily available at the Google Play store and Apple Store for download.

The installation of this model combined cable modem/ router is different than other Arris router but the app is very helpful.Well, some Arris Router will allow you to log in with the help of mobile app and this SURFboard application is only compatible with SURFboard cable router and modem. For this go through these steps :

  1. Firstly you need to connect the SURFboard cable and the modem using included coaxial cable.
  2. Go to Apple store or Google Play store from your device and download Arris SURFboard app and log in to the application.
  3. Then you need to scan the QR code when required, which is on the router.
  4. After scanning the app will take you to the Login and installation process accordingly.

Here you can find some YouTube tutorials which may help you.

In this video you can see how to find out the IP address, username and password by accessing the router’s menus.

This video will show how to install and activate SURF board modem and Wi-Fi router and also how to configure your router.

From this video you will get to see how to set Arris internet, Wi-Fi and voice modem.

How to Reset Arris Router

You may require to perform the reset of your router due to technical issues or if you’re facing trouble while logging in. Or else if you are unable to recall the username and password combination made by you, you need to reset your router to get it back in it’s initial form. Means with default credentials you can change your username and password again as you desire.

You need to keep this in your mind that reset and reboot are not the same thing. For instance, after power outage or there’s a problem with your unit to get connected, rebooting takes place and it is quite common.

Rebooting stands for turning off and turning on the Router which won’t affect your settings but a factory reset deletes all settings including username and password set by you.

Resetting an Arris Router

If your facing problem doesn’t solve with rebooting then you have to go for factory reset and this can be performed in three methods:with the main menu on the internet browser, hitting reset button and 30-30-30 method.

It is recommended that except A/C cable unplug other wires before doing reboot or reset.

Rebooting Arris Router

Generally technical issues can be solved with it. But if it persists then you’ll have to go for resetting. For this you can apply any of them:

  1. Hold the power button until the router turns off and press it again to turn it on.
  2. Or you can unplug it from its power source and after five minutes plug it again.

How to Factory Reset an Arris Router Using Browser

Follow these steps to reset Arris Router using main menu on internet browser:

  1. Navigate to any internet browser on your device and on this log in to your router.
  2. Go to the main menu and hit on the “Utilities” option.
  3. Opt for “factory reset” option.
  4. Then the router will undergo the factory reset.

This will take two to five minutes to reset and to return to its Factory settings. After that it will turn off and then will turn on again and try to log in to the router with default username and password, once the lights have started blinking or turned on. 

How to Factory Reset an Arris Router Using Button

To reset your Arris router with the help of button follow these steps:

  1. In your router search for a small hole with the button inside, where the reset button is located in your router.
  2. With a small object which is thin and has a dull edge (example : unfolded Paper Clip or ballpoint pen or it could be a sim card key ), which can be inserted into the whole easily. Insert it and hold the button down for ten seconds until it turns off.
  3. Within a few minutes, after reset, the router will turn back on by lighting up the Lights in the system.
  4. Now log in with the default username and password combination which is listed on the back of your router and configure it as you like.

 How to Reset an Arris Router Using 30-30-30 Method

After rebooting or resetting still you are facing the problems you may try the 30-30-30 method as this form of reset is more effective than the rest so it is recommended to not apply until all other methods fail.

  1. Firstly, press down that reset button in the hole using a sim card key or ballpoint pen or paperclip for 30 seconds.
  2. For 30 seconds you need to unplug the router and while unplugging, keep that reset button holding down.
  3. Plug in the router again and hold the power button for 30 seconds.
  4. Release the reset button after releasing the power button.
  5. Then the router will reset by itself.

Once it Lights turned on, log in to your router and enter the default username and password listed on the back of your router.

You can watch their videos to get the detailed idea.

How to Factory Reset Arris Router Using Wi-Fi Access Point

In this video you will get to know how to Factory Reset your Arris Router via Wi-Fi Access Point. In this video it is shown how to reset wireless modem from Midco Arris DG3450 and configure it.

How to Configure Arris Router

Everyone wants a secure internet connection and that can be achieved by changing it’s configuration via settings in the router’s main menu. In many ways you can configure your router but from them changing username and password combination and updating the security settings (includes wireless SSID name and password changing) is the easiest way. It is recommended to have an up to date wireless Security always before connecting to a device.

In case of factory reset or you might forget the usernames and passwords in respective fields so it brings one pen and paper to jot down them before you start settings. Listed by model number, this link provides a chart with username and password combination.

How to Change an Arris Router’s Username

To change the username of your Arris Router, go through these steps:

  1. Firstly, log in to the Arris Router.
  2. Go to the main menu and to get the drop-down menu place your mouse pointer over the option “status”.
  3. Under “status” titled drop-down menu opt for “Security” link.
  4. Choose “change username” from the drop-down menu under the “Status-Security” page.
  5. In the “Enter Current Username” titled text box type the default username name.
  6. In the “Enter Current Password” named text box, type the default password.
  7. Now enter the new username from your end in the text box entitled “Enter New Username”. It is recommended to make username easily identifiable though not that which can be guessed easily.
  8. To confirm the new username type new username again in the text box labeled “Re-Enter New Username”.
  9. Click on the “Apply” option to save the changes.

Now the username of your Arris Router is configured and it is ready to use.

How to Change an Arris Router’s Password

After log in to your router you can change it’s password and for this follow these steps :

  1. After changing the router’s username go to the drop-down menu and opt for “change password”.
  2. Type the username of the router in the text box labeled “Enter Username” .
  3. In the box titled “Enter Current Password” type your default password.
  4. In the text box entitled “Enter New Password”, type the new password you’ve created. (It is recommended to use special characters to make it unique and more secure)
  5. Re-type your new password in the field titled “Re-Enter New Password” to confirm the new password and press “Apply” to save the changes.

Now your Arris Router’s password is changed and it is ready to use.

Update the Wireless Security Settings

Follow the steps to update the wireless Security settings.

  1. Firstly, log in to your Arris Router with help of username and password.
  2. Navigate to the main menu and from there click on the “Wireless” tab to get the drop-down menu. From this category click on “Primary Network Settings”.
  3. In the current page you will see tabs for each bandwidth which your internet supports and to change wireless settings click on a tab. For instance, for dual-bandwidth you can see two tabs : One for 2.4GHz and other for 5GHz.
  4. Now opt for the option “enabled” under “wireless network” domain.
  5. Now change the SSID name by going to the text box under the category “network name (SSID)”. This name will display whenever connecting a wireless device. It should be immediately recognized by you so it should be in a phrase.
  6. Now your need to enable the SSID broadcast.
  7. Under “wireless security” domain by clicking on the drop-down arrow you will get multiple options there but opt for “WPA/WPA2-PSK” as it offers the best Security for your network even it helps to keep safe your personal information.
  8. From the “encryption” field, choose “AES-TKIP” Option.
  9. Update the SSID password in the “passphrase” field. For your wireless connection this is the password which also may label as “Pre-Shared Key”. Well should be composed of the combination of letters, numbers, special characters and it should be a secure phrase. Just as a suggestion, you can write it down so that we don’t forget!
  10. Most routers consist of WPS or “WiFi-Protected Setup” button which is only compatible with WPS enabled devices and this allows you to connect devices to your wireless network without typing the Password. Well you can use this WPS feature if your wireless Security is set to WPA/WPA2.
  11. Now click on the “Apply” to save your made changes.
  12. Repeat steps 3 to 11 for another bandwidth connection, when you have a dual-bandwidth connection. Hence, they are two different connections, it is recommended to not set them with the same name but if you are using the same name for them then add a suffix to the second connection to identify them respectively.
  13. To update your wireless settings click on the “Apply” option.

Connect to the Internet Using WPS

After updating your Arris Router’s Settings  you can connect with all your devices. It can be done by using the WPS option or by directly logging in to your devices. With any of these two methods, you can connect to any wireless devices such as computers, gaming consoles, TVs. For this :

  1. Go to the back of your router. Find the WPS button there and press it until it turns on.
  2. Now on your device find the WPS button and hold it for at least five seconds.
  3. Now look at your device and if you are connected to the Internet.
  4. Follow these steps (2 and 3) for every wireless device you want to get connected to.

 Connect to the Internet Using a Device

To connect the internet using a Device follow the steps :

  1. You need to opt for the wireless menu on your device. It might involve the pressing on a wireless icon or you may get it by accessing the wireless menu under general settings category.
  2. Under this you need to search for your wireless internet connection.
  3. After finding, select your internet’s SSID name.
  4. Now enter the SSID password and then click on the “connect”.
  5. Now have a look at your device if it is connected to the Internet.

Now you can avail your internet access after connecting to your device. After accomplishing the basic login and configuration process (mentioned in the article earlier) your connection is secured for daily tasks including online shopping , remote work, internet searches. To apply changes in any other settings, you can take help from your user manual.

For more better understanding you can go through this video.

FAQs

In this section you can find those questions which people generally ask regarding the logging process. Here you might get the concise answer of your question!

How Do I Find my Arris Router Password?

All Arris Routers have the default username and password for the router and wireless connection. You can generally find those default values at the back of your router either printed or they are listed.

How Do I Change the Password on my Arris Router?

Initially you need to log in to your router with the default username and password, which is listed at the back of the router. Go to the router’s main menu and there under the “status” menu you will find the “security” labeled option and select it.

From the drop down menu opt for “change password” and after a click type the current username and password accordingly. Then enter your new username and password as you want to be in the ” Enter new username” slot and to save changes click on the “apply”  button.

How Do I Access my Arris Router Settings?

You can easily access your Arris Router Settings by logging into your router with default username and password combination which is given in the back of your router. Or else if you are already done with primary log in and configuration process then log in with your modified username and password combination. After log in you can easily access the router’s settings.

Conclusion

In this busy- digital life router has become an integral part of our daily life and technical issues may arise any time. So hope you have found this article helpful. Don’t forget to share your views on this or which problems faced with Arris Router and what method was useful for you. Good luck!

Filed Under: Router Login

Asus Router Login – Find Username, Password and IP

May 13, 2022 By Admin

Asus Router is one of the most popular and high performing router. Most of the users trust Asus in the router segment. However, it is always advisable to take appropriate steps to secure your identity, network and money when using routers. You should always change the default router login settings and update them frequently. Read below to find all the necessary details to setup your Asus Router.

How to Set Up an Asus Router

Follow the below mentioned steps to setup Asus Router at your home.

Step 1: Firstly, you need to connect the modem to the router. Use the ethernet cable to connect to WAN or Internet port present at the rear of the router. Connect the other port of the cable to the Ethernet or LAN port in the modem. This is a yellow port at the back of the modem.

Step 2: Next, power the router by pressing the power button present at the rear of the router.

Step 3: Further, type “192.168.1.1” in the internet browser. You will be asked to enter the “username” and “password”. This will allow you to log into Asus router configuration page. “admin” is the default username and password.

Step 4: Next, navigate to “Advanced Settings” under “Administration” tab. Here, go to the “System” tab and enter the new password and login name. Confirm the password and click on “Apply”.

Step 5: The next step is to change the name of the wi-fi displayed. Click on the “Network Map” button and move to the “System Status” section on the right. Click on the “Wireless Name (SSID)” option and enter the new name. Do the same for 5GHz band as well and apply the changes.

Step 6: The final step is to change the password for Wi-fi. Click on the “Authentication Method” option in the “System Status” section. Choose “WPA2-Personal” from the drop-down list. Type the new password in the “WPA-PSK key” tab. Select apply to save and update the router security settings.

How to Login to ASUS Wireless Router

Blue GUI

The interface is present in the model “RT-N13U”. Follow the below mentioned steps to login and configure Asus wireless router.

Step 1: Firstly, it is advisable to have a LAN cable connection between the system and router. This will ensure uninterrupted and stable connection.

Step 2: Next, type “192.168.1.1” or “router.asus.com” in your system’s web browser.

Step 3: Further, you will be asked to enter the password and login name. If this is the first time with configuration, the default login name and password is “admin”.

Step 4: Finally, the “Asus Router Homepage” will open and gives you access to change the security settings.

ASUSWRT

This is the firmware present in most Asus routers. Follow the below mentioned steps to login and configure Asus wireless router.

Step 1: Firstly, power on the router and connect to the system.

Step 2: Next, open any web browser you have on your system. You need to enter “192.168.1.1” or “router.asus.com” and click enter.

Step 3: Further, you need to enter the login name and password. If you are doing the configuration for the first time, the default login name and password is “admin”.

Step 4: Finally, the Asus homepage will open. Change the required router security settings from the configuration page.

Why is My Connection Not Secure?

All Asus routers are configured to default factory settings. You are at high risk of losing information to Hackers by not changing the default settings. Hackers have the default login information and to infiltrate the network need Google Away. They can control the router settings as well as change the configuration such as the login IP. They can steal your personal information by changing the DNS server.

How to find my router web credentials

Follow the below mentioned steps to find the router web credentials.

Step 1: Firstly, login to the router homepage. Use the default password and login name if you are logging in for the first time.

Step 2: The next step is to click on the “Administration” tab and select “Advanced settings”. Change the password and login name present under the “System” tab.

Step 3: Finally, click on apply to save the changes.

How to reset your password?

Reset is a great option when you do not remember the password and facing connection issues. You can use the steps mentioned below to reset password using the reset button.

Step 1: Firstly, press and hold the reset button. You generally need to press it for about thirty seconds. Some new router may require to only press the button for about 10 seconds. The LED light will start blinking.

Step 2: Reset process will complete once the LED lights stop blinking.

Step 3: The final step is to power off/on the router. Again, login on the homepage and apply appropriate settings.

How to Change WiFi (SSID) Name?

It is always better to change your Wi-fi (SSID) name for protection against hackers. The router’s default name can give hints which the hackers can use to infiltrate your network. It can also create confusion if your wi-fi range have another router with the same name. You should always create a long and strong password for better protection.

FAQ

How to login to Asus router?

Step 1: Firstly, power on the router and connect to the system. Type “192.168.1.1” or “router.asus.com” in your system’s web browser.

Step 2: Next, you will be asked to enter the password and login name. If you are doing the configuration for the first time, you can use “admin” which is the default login name and password.

Step 3: Finally, the “Asus Router Homepage” will open. It will allow you to change the security settings of the router.

Why is my ASUS router login not secure?

You need to change the default factory settings for your Asus router. Hackers also have the default information enabling then to hack the network and steal private information. They can use the Google Away for this purpose.

How to find ASUS router username and password?

Step 1: Firstly, login to the router homepage. Use the default password and login name “admin” for first time.

Step 2: Next, click on the “Administration” tab and select “Advanced settings”.

Step 3: Finally, change the login name and password under the “System” tab. Confirm the password and click on “Apply”.

Conclusion

It is very easy to configure your Asus router. You should always change the default settings for your Asus router for protection against hackers. It is advisable to update the password and login details frequently for better security.

Filed Under: Router Login

  • « Previous Page
  • 1
  • 2

Search Your IP Here

Popular IP Login Guides

  • Frontier Login – Find Username, Password and IP
  • TP Link Router Login – Find Username, Password and IP
  • DLink Router Login – Find Username, Password and IP
  • Motorola Router Login – Find Username, Password and IP
  • Verizon Router Login – Find Username, Password and IP
  • AT&T Router Login – Find Username, Password and IP
  • Cisco Router Login – Find Username, Password and IP
  • Arris Router Login – Find Username, Password and IP
  • Asus Router Login – Find Username, Password and IP
  • 192.168.2.254 IP Admin Login, Username and Password
  • 192.168.20.1 IP Admin Login, Username and Password
  • 192.168.1.10 IP Login Guide, Username and Password
  • 10.1.1.1 IP Admin Login, User and Password
  • 192.168.100.1 IP Admin Login, Username & Password Guide
  • 192.168.2.1 IP Admin Login, Username & Password Guide
  • 192.168.0.100 IP Admin Login, Username & Password Guide
  • 192.168.0.101 IP Admin Login, Username & Password Guide
  • 192.168.11.1 IP Admin Login, Username & Password Guide
  • 192.168.1.100 IP Admin Login, Username & Password Guide
  • 192.168.3.1 IP Admin Login, Username & Password Guide
  • 192.168.0.3 IP Admin Login, Username & Password Guide
  • 10.0.0.1 IP Admin Login, Username & Password Guide
  • Linksys Router Login, Username, Password and IP
  • Belkin Router Login, Username, Password and IP
  • Spectrum Router Login, Username, Password and IP
  • Xfinity/Comcast® Router Login, Username, Password and IP
  • Netgear Router Login, Username, Password and IP
Copyright 2020 IP192-168-0-1.Com